Method MR306 Mesh: First Look

In an industry that's all about the latest & greatest and taking advantage of styling trends, sometimes the 'less is more' approach is quite refreshing. 

Take our Method MR306 Mesh wheel, all new for 2014. With a slight tip of the cap to The Standard, the Mesh has a no-frills, no-nonsense truck wheel look. The Mesh is available in two finishes; matte black with machined face or all matte black.

Similar to the Standard, the outer lip of the Mesh features 13mm polished bolts. These bolts are all replaceable should you need them. As with all of our wheels, 'Method' is machined into a single spoke. 

Making your way to the center of the wheel, you'll see there is an all new push-through center cap design for the 306.

Above you will see the specs for the MR306 Mesh. Sizes range from 16"-20" with applications for most trucks, Jeeps and SUV's.

 

We're super excited about this wheel and think it will look killer on a wide range of vehicles. The Mesh will be in stock around the middle of January. Let us know if you have any questions in the comment section below. What rig do you think they'll look the best on? 


20 Comments

Anthony
Anthony

November 29, 2016

I just bought these wheels from 4wheelparts and want to check -

Will they fit on a 1985 F-250 4×4 6.9L Long Bed? I was told I may need to cut holes to fit the 4×4 hubs.

Matt Hernandez
Matt Hernandez

October 02, 2016

Just purchased the double standards for my 15 grand Cherokee I was wondering if I can purchase the chrome 13mm bolts. Also wondering if the 306 cap would fit as well I like that cap way more to me the double standard cap is to long.

Louis
Louis

July 14, 2015

Are any of these hub centric for 2014 Toyota Tacomas in 16" or 17"?

zach
zach

June 04, 2015

What is the wheel weight of the 301, for
16 × 8?

dario
dario

April 04, 2014

can the bolts on the outer lip come in black?

Dave
Dave

February 17, 2014

What are the weights per wheel?

LostinKorea
LostinKorea

January 01, 2014

Will these be availble in a 5 on 4.5 bolt pattern for the TJ?

Thanks,

brandon

Russ
Russ

December 30, 2013

Size for RAM 1500 20×9?

Method
Method

December 30, 2013

Just a heads up:

From now on we’re going to exclusively use Disqus for the comment section of the Blog. These comments will be deleted when we officially switch over tomorrow.

Shawn – The wheels will be available for purchase through our website or one of the many retailers that stock our products.

Marcin – Yes, 16" will be available with a 5×5 bolt pattern.

Marcin
Marcin

December 29, 2013

Will these be available in a 16" with a 5×5 bolt pattern?

Marcin
Marcin

December 29, 2013

Will these be available in a 16" with a 5×5 bolt pattern?

Shawn
Shawn

December 28, 2013

where can I buy these for a 2008 dodge ram 2500?

Method
Method

December 23, 2013

Mike – We will only be offering a 20×9.

John – No plans for a beadlock at this time.

Alberto – Wheels will be available for purchase in the store section of the site or through one of our dealers.

Osbaldo – The 18" or 20" with a +18 offset will be the correct size for your ’07 Tundra.

Kris
Kris

December 22, 2013

Too bad no Jeep 17×9 sizes

Lannie
Lannie

December 20, 2013

I believe they would look best on the FJ Cruiser. I am a huge fan of the Standards, they’re what I have on my Avalanche.

Damien Murphy
Damien Murphy

December 20, 2013

The MR306 Mesh are bad ASS wish the 20×9 were 0 off set they would look kick ASS on my 2014 GMC 1500 crew cab!!!
Am still looking for wheels DAM thought I found them.

Mike
Mike

December 19, 2013

Are these available now for a Jeep JK 20 × 8

John Doak
John Doak

December 19, 2013

First off, they look bitch’n! And would look even better on my Raptor!!
Will they be offered in beadlock?

alberto
alberto

December 19, 2013

where can buy? need for my tacoma ’14

Osbaldo Haro
Osbaldo Haro

December 19, 2013

Question will this fix my 07’ tundra limited with a 5×150?
5 lug 150mm High Positive Offset